Ghost Immobiliser Installation
Guard your precious possessions from car thieves by adding an immobiliser ghost. Our TASSA-certified system is safe from key cloning, hacking, and vehicle immobiliser bypass.
The system is hidden within your vehicle's wiring loom It is inaccessible to anyone looking. It is operated by generating pin code push sequences that are activated by existing buttons on steering wheel, door cards and the centre console.
No circuit cuts
It's not a surprise that people want to protect the car they've worked so hard to buy. However, traditional security devices such as alarms and wheel locks can easily be cut off or taken over by thieves. A ghost immobiliser is a highly-effective solution that operates silently and isn't easily detected by modern thieves.
Ghost immobilisers, also known as a hidden device, is a device that communicates to the data network of your vehicle's CAN to shut off the engine. It does this without radio frequencies or key fobs. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash and door panels to generate a unique pin code that only you know. The code can be altered at any time and can be as long as 20 digits long, depending on what you prefer. It also comes with a secure emergency code that you can use should you forget your PIN.
The ghost immobiliser can be used to stop relay boxes from transferring the signal of your car's key from inside your home, which will open the doors and begin the vehicle. It could even block techniques of stealing your vehicle such as OBD port hacking. The device is tiny, weatherproof and difficult to see. It's also very difficult to alter.
Another advantage of the ghost immobiliser is that it can be fitted in your car without any permanent marks. It is ideal for people who are planning to sell their vehicle in the near future. It is also much quicker and simpler to install as than a factory-fitted unit.
The Autowatch Ghost, a revolutionary technology, is a new generation device that prevents thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the existing buttons to generate an unique PIN code. This is a stealthy system that can be put in place without removing wires and requires no additional key fobs. It is also connected to the original ECU of the vehicle, preventing thieves bypassing it with a new key. This system is TASSA certified and can be connected to an International Security Register, allowing owners peace of mind knowing that their vehicles are safe from theft.
No scanning with RF
You'll want to safeguard your vehicle from theft if you have spent an enormous amount of money and spent a lot of time customizing it. Installing an immobiliser is one of the most effective ways to avoid theft. It will prevent your vehicle from starting until you enter a unique code. You can create a 20-digit pin using the buttons on your dashboard and steering wheel. This will ensure that only you are able to drive your car. It is also possible to set up a service or valet mode that allows you to start your car for a short period without entering the PIN code. This allows the technician to work on your vehicle without being present. This feature is great for those who wish to cut down on time and simplify their lives.
Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle. It uses the buttons located on the dashboard and steering wheel to program a PIN code. It is designed to blend into with the vehicle's design, as it doesn't emit any noise or light indicator. It can be put in anywhere on your vehicle without impacting the appearance of your vehicle.
This stealthy gadget has been approved by TASSA and can reduce the cost of insurance. It also comes with the ability to track that can track your vehicle even if it's been stolen. This is great for those who own a unique expensive car that you've spent a lot of effort customizing.
ghost immobiliser fitting can be used together with an iPhone application to allow you to start your car remotely in the event that you have forgotten your PIN or are unable to get into the vehicle for some reason. This feature is ideal if you have to do some errands, or pick up your children and do not want to risk having someone else drive your car. This feature is beneficial if you have to take your car to a mechanic for service or repair.
Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, which makes it unnoticeable to thieves using RF scanning or code grabbing technology. It is also able to protect your car against key cloning and ECU swapping, which are the most common methods used to steal cars.
No key to cloning
Ghost immobilisers are a great option to protect high-end vehicles. They are designed to prevent key copying. They stop your car from being started unless a PIN code is entered along with the regular key fob. This makes it extremely difficult for thieves to rob your vehicle, and may discourage them from attempting it in the first place. This is a great idea if your vehicle has been heavily customized or if it's a rare model.
These immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden which means there is no visible sign of its presence in the vehicle. It is also impossible for a burglar to locate the device using radio frequency scanning or code technology for grabbing. This means that a burglar must spend much longer to steal your vehicle.
A criminal will need to know the unique pin sequence and the exact location of the ghost in order to bypass it. The pin code is unique to you and you can change it as often as needed. The pin code is easy to remember, but mathematically unattainable for someone else to understand. Additionally, the engineer will have provided you with a backup PIN code that can be used to bypass the pin in case you ever forget the pin.
The Ghost CAN Bus immobiliser can be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and completely customizable to match the appearance of your car. It is also very affordable and simple to use. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, providing that the new vehicle is compatible with the.
The immobiliser on the CAN bus is compatible with a number of other security features. For instance, it can detect the damage to your vehicle and notify the owner. It will also shut off the engine if it detects that the vehicle has been tampered with. The system will protect your vehicle from hacking as well as key duplicate. It can also detect vibrations and contact with the vehicle. In addition, it can alert the owner if the vehicle has been moved.
No OBD port hacking
Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, turn off your key fob, and code new keys. This technology is an enormous improvement on traditional methods used by thieves in the past to steal your vehicle. The CAN data network means that the system won't be affected by disconnecting or changing your battery.
The Autowatch Ghost is the first CAN bus immobiliser aftermarket worldwide, safeguards against key-cloning, hacking and replica car theft. It doesn't use LED indicators or key fobs. Instead, it uses the buttons on your steering wheel, console, and door panels.
Modern thieves use diagnostics to identify circuit cuts on your vehicle. They can bypass immobilisers that require lots of wiring or are incorporated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not identified by diagnostic tools that are professional. It can even be fitted on vehicles equipped with anti-theft systems.
A Ghost immobiliser comes with a major benefit: your vehicle can only be started by someone who knows your PIN and has physical access to your vehicle. This is a big advantage over traditional security systems which are able to be bypassed using cable tampering, a screwdriver or a universal remote controller.
You can easily reset your PIN in case you forget it by using the emergency PIN reset feature on a computer or mobile phone. This is a great option when you want to start your car after it's left in a garage or the valet parking service.
The Autowatch Ghost 2 is the latest version of the product and is approved for insurance by TASSA when installed by one of our authorized installers. It features a QR fingerprint system for individual components to be identified, which allows the return of stolen components in the event that they are discovered. It can also be set to'service mode' that will allow the engine to start when your car is in a garage or with valet parking, but you must enter your PIN number to leave the vehicle.